Home>Solar>>Lighting
& Communications>>>Power Ready Systems
| UtilityFree
Power Ready Systems |
Industrial
Prepackaged Systems Ideal for
Telecommunications
•
RTU/SCADA Applications •
Data Collection •
Weather Instrumentation •
Security Lighting & Surveillance •
Navigational Aids
|
|
|
Top
right: Power Ready System used for gas line monitoring.
Center: The SunWize PR-10
Bottom: The SunWize PR-50 used for remote gas
line data collection
|
|
The
SunWize™ Power Ready Systems are complete, integrated
power supplies designed for loads requiring reliable 12,
24 or 48 Volts DC. Each system provides safe and
reliable power generation without the need and expense
of installing utility power. The sealed, maintenance free
batteries are designed for deep cycle operation and extended
life in solar applications. The aluminum array support structures
and battery enclosures are strong yet lightweight and corrosion
resistant for harsh marine or severe weather locations.
Because
Power Ready Systems are designed to withstand rugged transportation
to remote sites, single-lift integral lifting lugs and/or
forklift slots are provided. Optional helicopter handling
features are also available. The system is fully assembled
for factory testing before shipment. The prewired systems
are typically shipped fully assembled with a protective cover
over the array and are bolted to a skid. The batteries are
shipped separately. Power Ready Systems carry a one-year system
warranty for materials and workmanship. A three-year SunWize
performance warranty is available on pre-packaged systems.
The solar modules have up to a 25-year warranty, the longest
in the industry. Careful component selection results in a
system with a lifetime exceeding 25 years with battery replacements
every five to ten years.
|
| |
 |
| |
| SYSTEM
SELECTION TABLE (Figures are daily load in Amp-hrs.day.) |
|
12 volt
SYSTEMS |
1.0 |
1.5 |
2.0 |
2.5 |
3.0 |
3.5 |
4.0 |
4.5 |
5.0 |
5.5 |
6.0 |
24 volt
SYSTEMS |
| PR
5-12-19 |
.24
|
.36
|
.48 |
.60 |
.72 |
.84 |
.96 |
1.0
|
1.2
|
1.3
|
1.4
|
PR
10-24-38 |
| PR-10-12-19 |
.46 |
.72 |
.96 |
1.2 |
1.4 |
1.6 |
1.9 |
2.1 |
2.4 |
2.6 |
2.8 |
PR
20-24-38 |
| PR
20-12-38 |
.96 |
1.4 |
1.9 |
2.4 |
2.8 |
3.3 |
3.8 |
4.3 |
4.8 |
5.2 |
5.7 |
PR
40-24-38 |
| PR
36-12-70 |
1.6 |
2.5 |
3.3 |
4.2 |
5.0 |
5.8 |
6.7 |
7.5 |
8.4 |
9.2 |
10.0 |
PR
72-24-70 |
| PR
50-12-115 |
2.4 |
3.6 |
4.8 |
6.0 |
7.2 |
8.4 |
9.6 |
10.8 |
12.0 |
13.2 |
14.4 |
PR
100-24-115 |
| PR
75-12-130 |
3.6 |
5.4 |
7.2 |
9.0 |
10.8 |
12.6 |
14.4 |
16.2 |
18.0 |
19.8 |
21.6 |
PR
150-24-130 |
| PR
100-12-230 |
4.8 |
7.2 |
9.6 |
12.0 |
14.4 |
16.8 |
19.2 |
21.6 |
24.0 |
26.4 |
28.8 |
PR
200-24-230 |
| PR
150-12-260 |
7.2 |
10.8 |
14.4 |
18.0 |
21.6 |
25.2 |
28.8 |
32.4 |
36.0 |
39.6 |
43.2 |
PR
300-24-260 |
| PR
200-12-390 |
9.6 |
14.4 |
19.2 |
24.0 |
28.8 |
33.6 |
38.4 |
43.2 |
48.0 |
52.8 |
57.6 |
PR
400-24-390 |
| PR
240-12-460 |
11.5 |
17.2 |
23.0 |
28.7 |
34.5 |
40.2 |
46.0 |
51.7 |
57.5 |
63.2 |
69.0 |
PR
480-24-530 |
| PR
300-12-600 |
14.4 |
21.6 |
28.8 |
36.0 |
43.2 |
50.4 |
57.6 |
64.8 |
72.0 |
79.2 |
86.4 |
PR
600-24-600 |
| PR
350-12-690 |
16.8 |
25.2 |
33.6 |
42.0 |
50.4 |
58.8 |
67.2 |
75.6 |
84.0 |
92.4 |
100.8 |
PR
700-24-795 |
| PR
400-12-795 |
19.2 |
28.8 |
38.4 |
48.0 |
57.6 |
67.2 |
75.6 |
84.0 |
96.0 |
105.6 |
108.0 |
PR
800-24-795 |
| PR
450-12-900 |
21.6 |
32.4 |
43.2 |
54.0 |
64.8 |
75.6 |
86.4 |
97.2 |
108.0 |
118.8 |
129.6 |
PR
900-24-900 |
| PR
500-12-1060 |
24.0 |
36.0 |
48.0 |
60.0 |
72.0 |
84.0 |
96.0 |
108.0 |
120.0 |
132.0 |
144.0 |
PR
1000-24-900 |
|
| |
|
| |
| Standard
Features and Benefits |
| Solar
modules are fully encapsulated to resist harsh weather conditions |
| Low
voltage load disconnect |
| Sealed,
lead-acid battery designed for deep discharge cycling |
| NEC
code compliant overcurrent protection and safety disconnect |
| Temperature
compensated battery charging |
| Corrosion
resistant control/battery enclosure |
| Installation,
operation & maintenance documentation |
| Solid
state electronics for improved efficiency and reliability |
| Preassembled,
prewired systems minimize field installation time & eliminate
wiring errors |
| Low
maintenance and operating costs |
| Complete
systems reduce specifying and buying time |
| Quality
components assure long system life |
| Full
system and performance warranty available on prepackaged systems |
| |
| System
Options (choose any & enter into SunWize
Part Number) |
| a.
DC to DC converter |
| b.
DC to AC inverter |
| c.
Data logging / Remote monitoring |
| d.
Cathodic protection controller |
| e.
Electronic load compartment |
| f.
Theft deterrent solar module hardware |
| g.
Helicopter lifting lugs |
| h.
Bird deterrents |
| |
| Controller
Options (choose ONE & enter into SunWize Part Number) |
| i.
SunWize LCD - displays battery voltage, SOC, charging & load
current, controller status/errors |
| j.
SunWize LVA - low battery SOC/load disconnect contact closure |
|
HOW
TO SELECT YOUR SYSTEM
The chart below specifies a system designed to meet the daily
load of your equipment.
1) Use the map on the inside back cover to select the insolation
zone that corresponds to the equipment site location.
2) Determine your daily equipment load requirement in AmpØhrs/day
at the specified voltage.
3) In the Selection Table, under your zone column, find the
value of AmpØhours/day that is greater than or equal to your
load. Based on your system voltage, select your SunWize part
number.
|
|
| Module
Wattage |
| |
| System
Voltage |
| 12
volts |
| 24
volts |
| 48
volts |
| |
| Battery
Amp-hr Rating |
| |
| Enclosure
Type |
| F
- Front opening hinged door, pole mounted |
| T
- Top opening hinged door, ground/pad mounted |
| C
- Front opening door (screw-type), pole mounted |
| E
- Economy |
| Module
Mount Type |
| I
- Integral with enclosure |
| P
- Pole mount, separate from enclosure |
| G
- Ground mount, separate from enclosure |
| Enclosure
Finish |
| A
- Milled aluminum (standard) |
| W
- Powder coated white aluminum |
| S
- Galvanized steel |
| F
- Fiberglass reinforced polyester |
| Mount
Finish |
| A
- Milled aluminum |
| P
- Painted steel |
| S
- Galvanized steel |
| Wire
Protection |
| 0
- PV and battery wired directly to controller, fused battery
line |
| 1
- DC-rated circuit breakers for PV and battery (standard Ø NEC
compliance) |
| Lightning
Protection |
| 0
- Standard MOV surge protection |
| 1
- Silicon-oxide varistor (SOV) |
| Load
Distribution and Control |
| 0
- None, load wired directly to controller |
| 1
- Four terminal load distribution block (standard) |
| 2
- DC-rated circuit breaker |
| 3
- Multi-cycle timer |
|
|
| |
 |
| |
| Standard
Power Ready Systems |
List
Price |
| PR5-12-19-EIAA-000 |
Economy
Enclosure, Solsum Controller |
$539.00
|
| PR10-12-19-EIAA-000 |
Economy
Enclosure, Solsum Controller |
$566.00
|
| PR20-12-38-CPAA-000 |
Screw
Cover Front Door, Solsum Controller |
$854.00
|
| PR36-12-70-CPAA-000 |
Screw
Cover Front Door, Solsum Controller |
$1,199.00
|
| PR40-12-70-CPAA-000 |
Screw
Cover Front Door, Solsum Controller |
$1,169.00
|
| PR50-12-115-CPAA-100 |
Screw
Cover Front Door, Alpha w/Breakers |
$1,499.00
|
| PR75-12-130-CPAA-100 |
Screw
Cover Front Door, Alpha w/Breakers |
$1,749.00
|
| PR100-12-230-FPAA-100 |
Hinged
Front Door, Alpha w/Breakers |
$2,447.00
|
| PR150-12-260-FPAA-100 |
Hinged
Front Door, Gamma w/Breakers |
$2,933.00
|
| PR200-12-390-FPAA-100 |
Hinged
Front Door, Sigma w/Breakers |
$3,869.00
|
| PR240-12-460-FPAA-100 |
Hinged
Front Door, Sigma w/Breakers |
$4,625.00
|
| PR300-12-600-TIAA-101 |
Pad
Mounted Enclosure, Omega w/Breakers |
$5813.00
|
| PR350-12-690-TIAA-101 |
Pad
Mounted Enclosure, Omega w/Breakers |
$7,499.00
|
| PR400-12-795-TIAA-101 |
Pad
Mounted Enclosure, Omega w/Breakers |
$7,599.00
|
| PR450-12-900-TIAA-101 |
Pad
Mounted Enclosure, Omega w/Breakers |
$8,695.00
|
| PR500-12-1060-TIAA-101 |
Pad
Mounted Enclosure, C40 w/Breakers |
$9,899.00
|
| Call
for pricing on 48 volt units and Power Ready Systems configured with
other options |
| Standard
Power Ready Systems |
List
Price |
| PR10-24-38-CPAA-000 |
Screw
Cover Front Door, Solsum Controller |
$949.00
|
| PR20-24-38-CPAA-000 |
Screw
Cover Front Door, Solsum Controller |
$1189.00
|
| PR40-24-38-CPAA-000 |
Screw
Cover Front Door, Solsum Controller |
$1259.00
|
| PR72-24-70-FPAA-000 |
Hinged
Front Door, Solsum Controller |
$1.999.00
|
| PR80-24-70-FPAA-000 |
Hinged
Front Door, Solsum Controller |
$1,943.00
|
| PR100-24-115-FPAA-100 |
Hinged
Front Door, Alpha w/Breakers |
$2,645.00
|
| PR150-24-130-FPAA-100 |
Hinged
Front Door, Alpha w/Breakers |
$2,995.00
|
| PR200-24-230-FPAA-100 |
Hinged
Front Door, Alpha w/Breakers |
$3,995.00
|
| PR300-24-260-FPAA-100 |
Hinged
Front Door, Gamma w/Breakers |
$4,995.00
|
| PR400-24-390-TIAA-101 |
Hinged
Front Door, Sigma w/Breakers |
$7,995.00
|
| PR480-24-530-TIAA-101 |
Hinged
Front Door, Sigma w/Breakers |
$9,521.00
|
| PR800-24-600-TIAA-101 |
Pad
Mounted Enclosure, Omega w/Breakers |
$11,249.00
|
| PR700-24-795-TIAA-101 |
Pad
Mounted Enclosure, Omega w/Breakers |
$13,994.00
|
| PR800-24-795-TIAA-101 |
Pad
Mounted Enclosure, Omega w/Breakers |
$14,549.00
|
| PR900-24-900-TIAA-101 |
Pad
Mounted Enclosure, Omega w/Breakers |
$15,974.00
|
| PR1000-24-900-TIAA-101 |
Pad
Mounted Enclosure, C40 w/Breakers |
$17,747.00
|
| |
|
|
|
| |
 |
|
To
purchase products with your credit card call 800.799.1122
To
pay by check or money order send to:
North Coast Power • Box 151 • Cazadero,
CA • 95421
For
live help to size and price your system call 800.799.1122
For an email quote on the correct system for you
click here.
|
|
