| Sunmotor
M3 Pump
The
M3 pumps 2 gallons per minute to a maximum head of 23 feet above
the source. At ten feet of head, it will pump 5 gallons per minute.
It can easily supply more than 200 gallons in one hour of full sun
with just one 75 watt solar module. The complete kit comes with
a pump, float, screen, 50 feet of cable, 24 feet of discharge hose
and 100 feet of safety rope. Order a 75 watt solar module and pole-mount
to complete the system.
Price: $995
Sunmotor
M10 and M20 Pump Kits
These
are larger versions of the M3. They are ideal for a wide range of
remote pumping applications, including livestock watering, landscaping,
wetlands development, stream protection and aeration. As shown in
the chart, the M10 can pump 10 GPM at 30 feet of lift, with a maximum
lift of 65 feet. The M20 can pump 20 GPM at 20 feet of lift, with
a maximum lift of 35 feet. Both operate on 300 to 400 watts of power
at 30 volts. Use four 75 watt or larger modules. Wire and pipe is
not included with the M10 and M20 pumps.
Prices: M10 Pump: $1,750
M20 Pump: $1,850
| Pumping
Head Vertical Lift |
Peak
Flow Rate |
Typical
output on a clear summer day |
| Meters
|
Feet
|
L/min |
US gpm |
Liters |
US
Gal |
| 1 |
3.3 |
22.7 |
6.0 |
5700 |
1500 |
| 2 |
6.6 |
21.6 |
5.7 |
5300 |
1400 |
| 3 |
9.8 |
20. |
5.3 |
4900 |
1300 |
| 4 |
13.1 |
16.7 |
4.4 |
4500 |
1200 |
| 5 |
16.4 |
13.6 |
3.6 |
4200 |
1100 |
| 6 |
19.7 |
11.4 |
3.0 |
3400 |
900 |
| 7 |
23.0 |
7.6 |
2.0 |
2300 |
600 |
|
