Utility Bill Reduction + Back-up Power Value Package

2 kW HomeSure Package

Performance: 160 - 400 Kilowatt-hours (kWh's) per month (depending on wind resource), 12 hours to over a week of back-up power (depending on load and wind)
Recommended for: Areas where power outages are a problem
Smaller essential loads
Property sizes of 1/2 acre or more
Locations covered by 35 ft. tower height limitations
Note: This system contains batteries and can provide essential household power during power outages.

We recommend this package for homeowners and small businesses that want protection from extended power outages, but don't need a system as large as the 7.5 kW HomeSure system. This capability requires the addition of batteries and a sophisticated inverter.

The HomeSure system keeps the batteries charged up and during an outage home power is supplied by both the batteries and the wind turbines. In regular (non-outage) operation any excess energy, once the batteries are charged, is sold to the utility company or "stored" by utilities offering net metering.

This package uses 64 ft towers because this is the most common tower height for the XL.1 turbine.  The taller the tower the better and towers shorter than 64 ft. should only be used in special circumstances.  The Tubular Tilt-up towers can be installed without concrete and they tilt-up after all the assembly work is done on the ground.

The batteries are Trojan T-105's, a workhorse of the home power industry.  A total of eight individual batteries are connected in two parallel strings of four batteries in series (24 VDC nominal).  This battery bank will support essential loads (lights, radio, TV, refrigerator, freezer, water pump, and blowers) for 4 - 12 hours without wind energy input.  The Trace SW4024 sine-wave inverter provides 120 VAC (or 230 VAC, 50 Hz at 2.2 kW) and has enough surge capacity to start motors up to ~ 1 Hp. (Note: We have switched from the Trace PS 2524 2.5 kW inverter to the larger 4 kW Trace SW4024 inverter because Trace has dropped the grid-intertie feature on the PS2524).  A back-up engine generator can be easily added. 

In addition to the equipment costs given below, a complete installation will typically include the following costs:  shipping, sales tax, permit costs, foundation and anchoring, wire run, turbine and tower erection, battery racks or vault, electrical hook-up, and inspection fees.  Some homeowners also incorporate a back-up gas, propane, or diesel generator into the system for maximum protection. Your dealer or Bergey WindPower can assist you in budgeting these additional costs.  For budgeting purposes, these costs typically range from $1,000 (customer installed, no sales tax, etc) to $4,000 (Certified Dealer, sales tax, etc).  

Options:
50 Hz: No Charge (3.3 kW)
Additional Storage
Larger Inverter
Taller Towers
Other Towers
Tower Raising Kit

This package may be purchased factory-direct.

To purchase products with your credit card call 800.799.1122

To pay by check or money order send to:
North Coast Power • Box 151 • Cazadero, CA • 95421

For live help to size and price your system call 800.799.1122
For an email quote on the correct system for you click here.